ZH

Products center

All Products

  • Brightening Agent
    4BK Anionic

    Be suitable for whitening and brightening cellulosic fibers, nylon, wool, and silk.

    Whiteness is bright and takes on bright and full slight blue tone.

    Typical dipping dosage: 0.2-0.8% (o.w.f)

    Details
  • Brightening Agent
    MPS-4 Anionic / Non-Ionic

    Be suitable for whitening and brightening polyester and its blended fabric.

    Whiteness is bright, takes on neutral tone, little dosage and whiteness enhancement is superior.

    Typical dipping dosage: 0.05-0.3% (o.w.f)

    Details
  • SCOURING AGENT
    M-1012CC Anionic / Non-Ionic 48.0%~50.0%

    Discontinous & Highly-efficient pre-treatment scouring agent for cellulose fibers and their blended fabrics

    Excellent penetrating and scouring performance, which can treat natural fibers and their blended fabrics and endow with superior whiteness and capillary effect; outstanding ability to prevent oil re-staining to assure not form floating oil and wax in scouring bath and provides excellent tolerance and stability to process; avoid the occurrence of yellow spots in synthetic fiber fabrics and overcome the occurrence of page defects caused by poor pre-treatment; Low foam

    Referential Dosage: 0.2-0.5% (o.w.f)

    Details
  • Neutral Degreasing Agent
    M-1191 Anionic / Non-Ionic 58.0%~60.0%

    Used for scouring and dyeing one -bath processing or alkaline oil removing for synthetic fibers and their blended fabrics.

    Application process not being affected by pH value, scouring and oil removing effect is raised with increasing of temp. and pH value, still has excellent oil removing effect under hard water condition, with good effect for old oil silk of spandex fabrics used along with M-1109

    Process dosage: 0.5-1% (o.w.f)

    Details
  • Elastic Fabric Degreasing Agent
    M-1151D Non-Ionic 78.0%~80.0%

    ●Suitable for scouring,oil removing and dyeing one-bath processing for synthetic fiber fabrics.

    ●Offers with excellent dispersing and emulsifying power, reduce the accumulation of impurities during dyeing and finishing processes. Low in achromicity , no dyeing block phenomenon, not easy to cause color splash and spots; It has minimal color stripping, no dyeing obstruction, and is less likely to cause color streaks or spots.

    ●Concentrate for of M-1151A, Process dosage:0.25~0.5%

    Details
  • Rapid Desizing Agent
    M-1011P Anionic / Non-Ionic 48.0%~50.0%

    Desizing, scouring, de-weighting processes and processing treatment for synthetic fiber and their blended fabrics

    Has excellent alkali resistance, being suitable for high-alkali processes.Provides good washing effects and ensures uniform and thorough desizing effect. Free of phosphorus.

    Dosage: Intermittent 0.5-1.5% (o.w.f), Continuous: 3-8g/L

    Details
  • Water Quality Conditioner for Printing and Dyeing
    M-2112 Anionic 48.0%~50.0%

    For de-sizing processing of fibers and also suitable for pretreatment, whitening, bleaching, dyeing, printing processes of all kinds of fibers

    Suitable for any process in where water quality improvement is required, strong alkaline resistance, and with excellent sequestering ,dispersion and colloids protection abilities.

    Process & Dosage: Intermittent: 0.2-0.5g/L, Continuous: 0.5-2g/L

    Details
  • Oxygen Bleaching Stabilizer
    M-1021CC Anionic 50.0%~52.0%

    None-silicone stabilizing agent for hydrogen peroxide bleaching process of cotton-like fabrics

    No silicone, no deposition, partially or completely replace of sodium silicate. Concentrate product.

     Dosage: 1-2 g/L

    Details
  • Leveling Agent for Cotton
    M-230K Anionic 23.0%~25.0%

    Leveling agent for reactive and direct dyestuff dyeing.

    Has excellent solubilizing power for reactive direct dyes(Especially for turquoise blue with with large molecule) , improve dye solubility to achieve uniform coloration and enhanced fastness; it has good dye protection functions, helping to stabilize dye shades; it can improve water quality and enhance color brightness; it can reduce dye bath contamination.

    Process dosage: 0.5-1.5% (o.w.f)

    Details
  • EFFICIENCY FIXING AGENT
    M-2345 Cationic / Non-Ionic 39.0%~41.0%

    ●Formaldehyde-free color fixing agent, which can enhance the wet fastness of reactive dyestuff dyeing or printing

    ●Resistant to hard water, acid, alkaline, and salt; has a wide pH application range, and performs with excellent color fixing effect under acidic, neutral, and slightly alkaline conditions. Offers excellent color fixation effect for dark, turquoise and bright blue; Suitable for color fixing treatment of post-mercerization; not affect light fastness and minimal in color change.

    ●Process dosage: Dipping: 0.3-0.8% (o.w.f), Padding: 3-8g/L

    Details

82 Records First 56789

Service Hotline:
+86-571-82695207
Add: No. 80, Hongfa Road, Qiaonan Block, Xiaoshan Economic and Development Zone, Hangzhou, Zhejiang, China
M.P.: +86 19517955739
E-mail:Supply-chain@mgchem.com; Exp@mgchem.com